Wine Enthusiast 236 02 40 02 Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 11
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
7
(b) Display Window
LEFT ZONE
RIGHT ZONE
The temperature display will show the set temperature when the wine & beverage centre control panel is unlocked
and selected
to be reset, and show the actual temperature when the control panel is locked.
or
The display window can be set to the off position for a less obtrusive appearance. Your wine & beverage centre
will continue
to run, but the wine & beverage centres display window will not be visible. You can check the temperature of the
wine & beverage centre
by pressing the power button
.
To set the display window to either on or off, press °C/°F button for 5 seconds while the control panel is locked.
Once the ON/OF indicator flashes, press °C/°F a second time to enter into the option interface. “ON” will show
the display window at all times while “OF” will turn off the display window. Leave the control panel untouched
for 5 seconds to confirm your option.
Note
:
Temperatures may fluctuate depending on whether the interior light is ON or OFF and depending on the position of
the bottles.
Before you start:
The wine & beverage centre should be placed in a location where the ambient temperature is between 60-80°
Fahrenheit. If the ambient temperature is outside this range, the performance of the unit may be affected. For
example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate.
(c) Temperature for Serving Wine
Although optimal storage temperature is generally regarded to be 53-57°F, different varietals of wine have
different recommended serving temperatures for optimal taste. The recommended temperature ranges for
serving different varietals of wine are listed below.
Red Wines: 60-66°F
White Wines 45-52°F
Sparkling Wines 40-45°F
Note:
If the unit is unplugged, loses power, or is turned off, you must wait 5 minutes before restarting.
Attempting to restart the wine & beverage centre before this time has elapsed may prevent the wine &
beverage centre from starting.
When you use the wine & beverage centre for the first time or restart the wine & beverage centre after
having been shut off for a long time, there will be a few degrees variance between the temperature you
select and the one indicated on the LED readout for the first few hours of operation. After a few hours of
operation, the temperature will normalize to the displayed temperature.
Page view 6
1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments