Wine Enthusiast 236 02 40 02 Manual download pdf (Page 10)

TROUBLESHOOTING GUIDE

Many common issues with your wine & beverage centre can be solved very easily. Try the troubleshooting tips

below should you experience any problems

PROBLEM

POSSIBLE CAUSE

Wine & beverage centre

does not

operate.

Not plugged in.

The appliance is turned off.

The circuit breaker tripped or a fuse has blown out.

Wine & beverage centre

is not cold

enough.

Check the temperature control setting.

External environment may require a higher setting. (e.g. room

needs to be air conditioned)

The door is opened too often.

The door is not closed completely.

The door gasket is not sealing properly.

Wine & beverage centre

is turning on

and off frequently.

The room temperature is hotter than normal.

The door is opened too often.

The door is not closed completely.

The temperature control is not set correctly.

The door gasket does not seal properly.

The lights do not work. Not plugged in.

The circuit breaker tripped or a fuse has blown.

The light is turned “OFF”.

Vibrations. Check to assure that the wine & beverage centre is on a level

surface.

The wine & beverage centre seems to

make too much noise.

A faint humming noise may come from the flow of the refrigerant,

which is normal.

As each cycle ends, you may hear gurgling sounds caused by

the flow of refrigerant in your wine & beverage centre.

Contraction and expansion of

the inside walls may cause

popping and crackling noises.

The wine & beverage centre is not on a level surface.

The door will not close properly. The wine & beverage centre is not on a level surface.

The door was reversed and not properly installed.

The gasket is dirty.

The shelves are out of position.

1 2 ... 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Wine Enthusiast 236 02 40 02 Manual Page 10

Comments to this Manuals

Related products and manuals for Wine coolers Wine Enthusiast 236 02 40 02